1.1.3.5 Packet Tracer – Configuring IPv4 and IPv6 Interfaces

Last Updated on March 14, 2018 by Admin

1.1.3.5 Packet Tracer – Configuring IPv4 and IPv6 Interfaces

Packet Tracer – Configuring IPv4 and IPv6 Interfaces (Answer Version)

Answer Note: Red font color or Gray highlights indicate text that appears in the Answer copy only.

Topology

Addressing Table

Device	Interface	IPv4 Address	Subnet Mask	Default Gateway
		IPv6 Address/Prefix
R1	G0/0	172.16.20.1	255.255.255.128	N/A
	G0/1	172.16.20.129	255.255.255.128	N/A
	S0/0/0	209.165.200.225	255.255.255.252	N/A
PC1	NIC	172.16.20.10	255.255.255.128	172.16.20.1
PC2	NIC	172.16.20.138	255.255.255.128	172.16.20.129
R2	G0/0	2001:DB8:C0DE:12::1/64		N/A
	G0/1	2001:DB8:C0DE:13::1/64		N/A
	S0/0/1	2001:DB8:C0DE:11::1/64		N/A
	Link-local	FE80::2		N/A
PC3	NIC	2001:DB8:C0DE:12::A/64		FE80::2
PC4	NIC	2001:DB8:C0DE:13::A/64		FE80::2

Objectives

Part 1: Configure IPv4 Addressing and Verify Connectivity

Part 2: Configure IPv6 Addressing and Verify Connectivity

Background

Routers R1 and R2 each have two LANs. Your task is to configure the appropriate addressing on each device and verify connectivity between the LANs.

Note: The user EXEC password is cisco. The privileged EXEC password is class.

Part 1: Configure IPv4 Addressing and Verify Connectivity

Step 1: Assign IPv4 addresses to R1 and LAN devices.

Referring to the Addressing Table, configure IP addressing for R1 LAN interfaces, PC1 and PC2. The serial interface has already configured.

Step 2: Verify connectivity.

PC1 and PC2 should be able to ping each other and the Dual Stack Server.

Part 2: Configure IPv6 Addressing and Verify Connectivity

Step 1: Assign IPv6 addresses to R2 and LAN devices.

Referring to the Addressing Table, configure IP addressing for R2 LAN interfaces, PC3 and PC4. The serial interface is already configured.

Step 2: Verify connectivity.

PC3 and PC4 should be able to ping each other and the Dual Stack Server.