Last Updated on April 26, 2021 by Admin Refer to the exhibit. An EtherChannel was configured between switches S1 and S2, but the interfaces do not form an EtherChannel. What is the problem? The interface port-channel number has to be different on each switch. The switch ports were not configured with speed and duplex mode. […]
Continue reading…
Daily Archives: April 26, 2021
Refer to the exhibit. The administrator tried to create an EtherChannel between S1 and the other two switches via the commands that are shown, but was unsuccessful. What is the problem?
Last Updated on April 26, 2021 by Admin Refer to the exhibit. The administrator tried to create an EtherChannel between S1 and the other two switches via the commands that are shown, but was unsuccessful. What is the problem? Traffic can only be sent to two different switches if EtherChannel is implemented on Gigabit Ethernet […]
Continue reading…
Which LACP technology is used for designating which member interfaces will be active in a port-channel configuration where there are more member interfaces than the maximum allowed?
Last Updated on April 26, 2021 by Admin Which LACP technology is used for designating which member interfaces will be active in a port-channel configuration where there are more member interfaces than the maximum allowed? LACP port priority LACP system priority LACP fast LACP min-links Answers Explanation & Hints: LACP fast advertises an LACP packet […]
Continue reading…
Which LACP technology is used for designating a specific number of member interfaces that must remain active in order for the EtherChannel bundle to be usable?
Last Updated on April 26, 2021 by Admin Which LACP technology is used for designating a specific number of member interfaces that must remain active in order for the EtherChannel bundle to be usable? LACP system priority LACP min-links LACP fast LACP port priority Answers Explanation & Hints: LACP fast advertises an LACP packet every […]
Continue reading…
Which LACP technology can identify and remove a LACP enabled link from an EtherChannel within three seconds when the link is experiencing connectivity issues?
Last Updated on April 26, 2021 by Admin Which LACP technology can identify and remove a LACP enabled link from an EtherChannel within three seconds when the link is experiencing connectivity issues? LACP fast LACP port priority LACP system priority LACP min-links Answers Explanation & Hints: LACP fast advertises an LACP packet every second and […]
Continue reading…
Which is a characteristic of EtherChannel?
Last Updated on April 26, 2021 by Admin Which is a characteristic of EtherChannel? EtherChannel uses physical ports that have been upgraded to provide a faster connection. STP will not block redundant EtherChannel bundles between two switches. STP treats all interfaces in an EtherChannel bundle as a single logical link. EtherChannel configuration is applied to […]
Continue reading…
Which two DTP mode combinations will form a trunk link between two switches? (Choose two.)
Last Updated on April 26, 2021 by Admin Which two DTP mode combinations will form a trunk link between two switches? (Choose two.) dynamic auto and dynamic auto trunk and access trunk and dynamic desirable dynamic auto and dynamic desirable access and dynamic auto Answers Explanation & Hints: There are five DTP mode combinations that […]
Continue reading…
Which Cisco proprietary protocol is used for dynamically forming a trunk connection between two switches?
Last Updated on April 26, 2021 by Admin Which Cisco proprietary protocol is used for dynamically forming a trunk connection between two switches? STP PAgP DTP VTP Answers Explanation & Hints: Dynamic Trunking Protocol (DTP) is a Cisco proprietary protocol used for dynamically negotiating a trunk connection between two Cisco switches.
Continue reading…
Given the following configuration, which two statements are true? (Choose two.)
Last Updated on April 26, 2021 by Admin Given the following configuration, which two statements are true? (Choose two.) switch(vlan)# vtp version 2 switch(vlan)# vtp mode server switch(vlan)# vtp domain Cisco switch(vlan)# vtp password mypassword This switch can create, modify, and delete all VLANs within the Cisco domain. This switch maintains a full list of […]
Continue reading…
Refer to the exhibit. Access1 is a new switch that is to be connected as a VTP client to the network once it has been configured. Given the output generated by the VTP server switch Dist-2, which series of configuration commands would successfully introduce the client switch into the VTP domain?
Last Updated on April 26, 2021 by Admin Refer to the exhibit. Access1 is a new switch that is to be connected as a VTP client to the network once it has been configured. Given the output generated by the VTP server switch Dist-2, which series of configuration commands would successfully introduce the client switch […]
Continue reading…