6.5.1.3 Packet Tracer Skills Integration Challenge

Posted on

Last Updated on March 12, 2018 by Admin

6.5.1.3 Packet Tracer Skills Integration Challenge

Packet Tracer – Skills Integration Challenge (Answer Version)

Answer Note: Red font color or gray highlights indicate text that appears in the Answer copy only.

Topology

You will receive one of three possible topologies.

Addressing Table

Device Interface IP Address Subnet Mask Default Gateway
[[R1Name]] G0/0 [[R1G0Add]] 255.255.255.0 N/A
G0/1 [[R1G1Add]] 255.255.255.0 N/A
[[S1Name]] VLAN 1 [[S1Add]] 255.255.255.0 [[R1G0Add]]
[[S2Name]] VLAN 1 [[S2Add]] 255.255.255.0 [[R1G1Add]]
[[PC1Name]] NIC [[PC1Add]] 255.255.255.0 [[R1G0Add]]
[[PC2Name]] NIC [[PC2Add]] 255.255.255.0 [[R1G0Add]]
[[PC3Name]] NIC [[PC3Add]] 255.255.255.0 [[R1G1Add]]
[[PC4Name]] NIC [[PC4Add]] 255.255.255.0 [[R1G1Add]]

Objectives

Finish the network documentation.

Perform basic device configurations on a router and a switch.

Verify connectivity and troubleshoot any issues.

Scenario

Your network manager is impressed with your performance in your job as a LAN technician. She would like you to now demonstrate your ability to configure a router connecting two LANs. Your tasks include configuring basic settings on a router and a switch using the Cisco IOS. You will then verify your configurations, as well as configurations on existing devices by testing end-to-end connectivity.

Note: After completing this activity, you can choose to click the Reset Activity button to generate a new set of requirements. Variable aspects include device names, IP addressing schemes, and the topology.

Requirements

  • Provide the missing information in the Addressing Table.
  • Name the router [[R1Name]] and the second switch [[S2Name]]. You will not be able to access [[S1Name]].
  • Use cisco as the user EXEC password for all lines.
  • Use class as the privileged EXEC password.
  • Encrypt all plain text passwords.
  • Configure an appropriate banner.
  • Configure addressing for all devices according to the Addressing Table.
  • Document interfaces with descriptions, including the [[S2Name]] VLAN 1 interface.
  • Save your configurations.
  • Verify connectivity between all devices. All devices should be able to ping any other device.
  • Troubleshoot and document any issues.
  • Implement the solutions necessary to enable and verify full end-to-end connectivity.

Note: Click Check Results button to see your progress. Click the Reset Activity button to generate a new set of requirements.

ID: [[indexNames]][[indexAdds]][[indexTopos]]