Last Updated on February 3, 2019 by Admin
9.5.1.2 Packet Tracer – Putting it All Together Answers
Packet Tracer – Putting it All Together (Answers Version)
Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only.
Topology
Addressing Table
| Device | Interface | IP Address | Subnet Mask | Default Gateway |
| R1 | G0/1 | 209.165.201.1 | 255.255.255.224 | N/A |
| S1 | VLAN 1 | 209.165.201.2 | 255.255.255.224 | N/A |
| Server | NIC | 209.165.201.30 | 255.255.255.224 | 209.165.201.1 |
Background / Scenario
This activity includes many of the skills that you have acquired during your Networking Essentials studies. First, you will configure the IP addresses on network devices in a simplified network. Second, you will set up the wireless configurations in home network. Finally, you will verify your implementation by testing end-to-end connectivity by accessing the web server, www.server.pka, and router R1 using SSH in the simplified network.
Implementation
Router R1
- Configure the device name according to the Addressing Table.
- Configure the IP address on G0/1 interface according to the IP addressing table and enable the interface.
- Create a banner that warns anyone accessing the device that unauthorized access is prohibited. Make sure to include the word warning in the banner.
- Assign cisco as the console password and enable login.
- Assign class as the encrypted privileged EXEC mode password.
- Encrypt all plaintext passwords.
Configure SSH on R1:
- Set the domain name to networking.pka
- Generate a 1024-bit RSA key.
- Create a user with a username admin with password cisco123
- Configure the VTY lines for SSH access.
- Use the local user profiles for authentication.
Switch S1
- Configure the device name according to the Addressing Table.
- Configure the IP address of the switch on SVI interface according to the IP addressing table and enable the interface.
Server
Configure the IP address of the server according to the IP addressing table.
Wireless Router in the Home
Enter the Home cluster. From the web browser on PC, configure the following:
Initial Wireless Router IP Address: ……………………… 192.168.1.1
Username / Password: ………………………………………..admin / admin
SSID: …………………………………………………………………MyHome
Security Mode: ……………………………………………………WPA2 Personal
Passphrase: ………………………………………………………..123Cisco
DHCP Configuration:
Wireless Router IP Address:……………………………….. 192.168.20.1
Starting IP Address: ……………………………………………192.168.20.101
Maximum Number:……………………………………………. 100
DNS 1: ……………………………………………………………… 209.165.201.30
End Devices in the Home
Configure the wireless settings so the end devices can access www.server.pka.
SSID: ……………………..MyHome
Security Mode:……….. WPA2 Personal or WPA2-PSK
Passphrase: ……………123Cisco
Note: For Tablet PC and Pda, use the Config tab for the wireless configurations.
Verify Connectivity
- Verify that IP addresses are in the correct networks. All the end devices should be in 192.168.20.0/24 network. If they are not in the correct network, enter the following commands at the command prompt.
PC> ipconfig /release
PC> ipconfig /renew - Verify that all end devices in the Home can access www.server.pka.
- Verify that all end devices in the Home can access R1 via SSH with password cisco123.
PC> ssh –l admin 209.165.201.1
Script
Router R1
enable
configure t
hostname R1
interface g0/1
ip add 209.165.201.1 255.255.255.224
no shutdown
banner motd $Warning: Unauthorized access is prohibited!!$
line con 0
password cisco
login
enable secret class
service password-encryption
ip domain-name networking.pka
crypto key generate rsa
1024
username admin password cisco123
line vty 0 4
transport input ssh
login local
Switch S1
enable
configure t
hostname S1
interface vlan 1
ip address 209.165.201.2 255.255.255.224
no shutdown