CCNA4 v6.0 Chapter 3 Exam Full 100%

Last Updated on February 20, 2020 by Admin

CCNA4 v6.0 Chapter 3 Exam Full 100%

1. Question
Which broadband wireless technology is based on the 802.11 standard?
- municipal Wi-Fi
- WiMAX
- CDMA
- UMTS
2. Question
What is the approximate distance limitation for providing a satisfactory ADSL service from the central office to a customer?
- 3.39 miles or 5.46 kilometers
- 2.11 miles or 3.39 kilometers
- 6.21 miles or 10 kilometers
- 11.18 miles or 18 kilometers
3. Question
What is a component of an ADSL connection that is located at the customer site?
- CO
- CPE
- SOHO
- DSLAM
4. Question
What is the function of the DSLAM in a broadband DSL network?
- multiplexes individual customer DSL connections into a single upstream link
- communicates directly with customer cable modems to provide Internet services to customers
- communicates directly with customer cable modems to provide Internet services to customers
- separates POTS traffic from ADSL traffic
5. Question
Which broadband technology would be best for a small office that requires fast upstream connections?
- DSL
- fiber-to-the-home
- cable
- WiMax
6. Question
What are two WAN connection enhancements that are achieved by implementing PPPoE? (Choose two.)
- Encapsulating Ethernet frames within PPP frames is an efficient use of bandwidth.
- DSL CHAP features are included in PPPoE.
- PPP enables the ISP to assign an IP address to the customer WAN interface.
- An Ethernet link supports a number of data link protocols.
- CHAP enables customer authentication and accounting.
7. Question
When PPPoE is configured on a customer router, which two commands must have the same value for the configuration to work? (Choose two.)
- dialer pool 2
- interface dialer 2
- ppp chap password 2
- interface gigabitethernet 0/2
- pppoe-client dial-pool-number 2
- ppp chap hostname 2
8. Question
Why is the MTU for a PPPoE DSL configuration reduced from 1500 bytes to 1492?
- to enable CHAP authentication
- to reduce congestion on the DSL link
- to accommodate the PPPoE headers
- to establish a secure tunnel with less overhead
9. Question
What are two characteristics of a PPPoE configuration on a Cisco customer router? (Choose two.)
- The PPP configuration is on the dialer interface.
- An MTU size of 1492 bytes is configured on the Ethernet interface.
- The Ethernet interface does not have an IP address.
- The customer router CHAP username and password are independent of what is configured on the ISP router.
- The dialer pool command is applied to the Ethernet interface to link it to the dialer interface.
10. Question
Where is PPPoE configured on a Cisco router?
- on an Ethernet interface
- on the dialer interface
- on a serial interface
- on any physical interface
11. Question
How can the use of VPNs in the workplace contribute to lower operating costs?
- High-speed broadband technology can be replaced with leased lines.
- VPNs can be used across broadband connections rather than dedicated WAN links.
- VPNs prevents connectivity to SOHO users.
- VPNs require a subscription from a specific Internet service provider that specializes in secure connections.
12. Question
How is “tunneling” accomplished in a VPN?
- New headers from one or more VPN protocols encapsulate the original packets.
- All packets between two hosts are assigned to a single physical medium to ensure that the packets are kept private.
- Packets are disguised to look like other types of traffic so that they will be ignored by potential attackers.
- A dedicated circuit is established between the source and destination devices for the duration of the connection.
13. Question
Which two statements describe a remote access VPN? (Choose two.)
- It connects entire networks to each other.
- It requires hosts to send TCP/IP traffic through a VPN gateway.
- It is used to connect individual hosts securely to a company network over the Internet.
- It may require VPN client software on hosts.
- It requires static configuration of the VPN tunnel.
14. Question
Which is a requirement of a site-to-site VPN?
- It requires a client/server architecture.
- It requires the placement of a VPN server at the edge of the company network.
- It requires hosts to use VPN client software to encapsulate traffic.
- It requires a VPN gateway at each end of the tunnel to encrypt and decrypt traffic.
15. Question
What functionality does mGRE provide to the DMVPN technology?
- It allows the creation of dynamically allocated tunnels through a permanent tunnel source at the hub and dynamically allocated tunnel destinations at the spokes.
- It creates a distributed mapping database of public IP addresses for all VPN tunnel spokes.
- It provides secure transport of private information over public networks, such as the Internet.
- It is a Cisco software solution for building multiple VPNs in an easy, dynamic, and scalable manner.
16. Question
Which two scenarios are examples of remote access VPNs? (Choose two.)
- A toy manufacturer has a permanent VPN connection to one of its parts suppliers.
- All users at a large branch office can access company resources through a single VPN connection.
- A mobile sales agent is connecting to the company network via the Internet connection at a hotel.
- A small branch office with three employees has a Cisco ASA that is used to create a VPN connection to the HQ.
- An employee who is working from home uses VPN client software on a laptop in order to connect to the company network.
17. Question
Refer to the exhibit. What solution can provide a VPN between site A and site B to support encapsulation of any Layer 3 protocol between the internal networks at each site?

CCNA4 v6.0 Chapter 3 Exam 002
- a GRE tunnel
- an IPsec tunnel
- a remote access tunnel
- Cisco SSL VPN
18. Question
Which three statements are characteristics of generic routing encapsulation (GRE)? (Choose three.)
- GRE encapsulation supports any OSI Layer 3 protocol.
- GRE is stateless.
- GRE does not have strong security mechanisms.
- The GRE header alone adds at least 24 bytes of overhead.
- GRE provides flow control by default.
- GRE is the most secure tunneling protocol.
19. Question
Refer to the exhibit. Which IP address is configured on the physical interface of the CORP router?

CCNA4 v6.0 Chapter 3 Exam 005
- 10.1.1.1
- 10.1.1.2
- 209.165.202.133
- 209.165.202.134
20. Question
Refer to the exhibit. Which IP address would be configured on the tunnel interface of the destination router?

CCNA4 v6.0 Chapter 3 Exam 003
- 172.16.1.1
- 172.16.1.2
- 209.165.200.225
- 209.165.200.226
21. Question
Refer to the exhibit. A tunnel was implemented between routers R1 and R2. Which two conclusions can be drawn from the R1 command output? (Choose two.)

CCNA4 v6.0 Chapter 3 Exam 004
- This tunnel mode is not the default tunnel interface mode for Cisco IOS software.
- This tunnel mode provides encryption.
- The data that is sent across this tunnel is not secure.
- This tunnel mode does not support IP multicast tunneling.
- A GRE tunnel is being used.
22. Question
What is used by BGP to determine the best path to a destination?
- cost
- hop count
- attributes
- administrative distance
23. Question
What command specifies a BGP neighbor that has an IP address of 5.5.5.5/24 and that is in AS 500?
- (config-router)# neighbor 5.5.5.5 remote-as 500
- (config-router)# router bgp 500
- (config-router)# neighbor 500 remote-as 5.5.5.5
- (config-router)# network 5.0.0.0 0.0.0.255
24. Question
True or False?
Multiple BGP processes can run on a router.
- true
- false
25. Question
Refer to the exhibit. Which two configurations will allow router R1 to establish a neighbor relationship with router R2? (Choose two.)

CCNA4 v6.0 Chapter 3 Exam 001
- R1(config)# router bgp 65001
  R1(config-router)# network 192.168.20.0
- R1(config)# router bgp 65001
  R1(config-router)# network 192.168.10.0
  R1(config-router)# neighbor 209.165.200.226 remote-as 65002
- R1(config)# router bgp 65002
  R1(config-router)# network 192.168.20.0
  R1(config-router)# neighbor 209.165.200.225 remote-as 65001
- R2(config)# router bgp 65002
  R2(config-router)# network 192.168.10.0
- R2(config)# router bgp 65002
  R2(config-router)# network 192.168.10.0
  R2(config-router)# neighbor 209.165.200.226 remote-as 65002
- R2(config)# router bgp 65002
  R2(config-router)# network 192.168.20.0
  R2(config-router)# neighbor 209.165.200.225 remote-as 65001
26. Question
Open the PT Activity. Perform the tasks in the activity instructions and then answer the question.

What is the code displayed on the web page?
- Welldone!
- BGP is running!
- BGP is configured!
- Configuration is correct!

CCNA4 v6.0 Chapter 3 Exam Full 100%

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question

11. Question

12. Question

13. Question

14. Question

15. Question

16. Question

17. Question

18. Question

19. Question

20. Question

21. Question

22. Question

23. Question

24. Question

25. Question

26. Question