Last Updated on June 30, 2018 by Admin
MF -- Wireless LAN Networks Quiz
Time limit: 0
Quiz-summary
0 of 9 questions completed
Questions:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
Information
MF -- Wireless LAN Networks Quiz
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
Results
0 of 9 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 points, (0)
Average score |
|
Your score |
|
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- Answered
- Review
-
Question 1 of 9
1. Question
3 pointsWhere would Wireless Access Points likely be found?Correct
Incorrect
-
Question 2 of 9
2. Question
3 pointsWhat statements correctly describe the frame subtypes in management frame? (Choose 3)Correct
Incorrect
-
Question 3 of 9
3. Question
3 pointsMatch the frequency channel saturation avoidance technique used.Sort elements
- Direct-sequence spread spectrum (DSSS)
- Orthogonal frequency-division multiplexing (OFDM)
- Frequency-hopping spread spectrum (FHSS)
- Frequency Modulation
- Pulse Modulation
-
The technique creates redundancy in the transmitted signal in an effort to counter quality loss in the wireless medium.
-
This technique is able to maximize spectral efficiency without causing adjacent channel interference.
-
This technique requires the sender and receiver to be synchronized to “know” which channel to jump.
Correct
Incorrect
-
Question 4 of 9
4. Question
1 pointsWhat are the three-stage process use by wireless client to associate with a Wireless Access Point? (One Answer per line)Correct
Incorrect
-
Question 5 of 9
5. Question
1 pointsWhat are reasons for clustering Access Points ?Correct
Incorrect
-
Question 6 of 9
6. Question
4 pointsWhat are the differences between Autonomous Access Point and Controller-based Access Point. (Choose 4)Correct
Incorrect
-
Question 7 of 9
7. Question
3 pointsWhich of the following statements about SSIDs are true? (Choose 3)Correct
Incorrect
-
Question 8 of 9
8. Question
1 pointsIn an attempt to maximize your wireless throughput while minimizing interference on your brand new 802.11b/g wireless Access Point, which setting should you change?Correct
Incorrect
-
Question 9 of 9
9. Question
1 pointsBob has set up a Wi-Fi network for his café that works well within the indoor area, but works poorly on the patio. What’s the least expensive option for making Wi-Fi work for the patio customers?Correct
Incorrect
Most Access Points come with default channel setting. To avoid interference with neighboring networks, it is advisable to use a wireless channel scanner to check for the less congested channel. Set your access point accordingly. Try to avoid placing access points near walls of the facility to minimize interference with neighboring networks. In addition to changing the channel, other settings you may wish to change include the name of your network and your router's security options.